Enphase Energy - Enlighten | Sign in to Enlighten

Production Meter Verification

×

Verify CT not supported for this device

Polarity Check

Request Timed Out. Please try again.

tickcheck

Polarity Check Passed

errorcheck

Polarity Check Failed(Insufficient meter data available to perform this check)

Checking if CT has missing branch circuits

This test is only valid for sunshine hours

Request Timed Out. Please try again.

Checking if CT has missing branch circuits

This test is only valid for sunshine hours

Request Timed Out. Please try again.

waiting

Checking if CT has missing branch circuits

This test is only valid for sunshine hours

tickcheck

CT has no missing branch circuits

This test is only valid for sunshine hours

errorcheck

Production CT might have missing branch circuits(Insufficient meter data available to perform this check)

This test is only valid for sunshine hours

Production CT direction or phase might be incorrect

Hide Details

warning

Check the following and try again

Ellipse

Make sure the PV circuit is switched ON and has been ON for at least 5 minutes

Ellipse

Check that only L1 wires pass through production CT and the production flow is in the direction of CT arrow from PV to breaker

Ellipse

Make sure that the blue and white wires are connected to the correct positions in the Gateway terminal block

Ellipse

Make sure that the wires running through the production CT only include PV generation (not any loads or storage)

Ellipse

Ensure that correct phase ie L1(a), is going through production CT

Ellipse

Check L1 phase consistency using a digital meter and ensure L1 of PV circuits and L1 at Gateway are in same phase

Hide Details

warning

Production readings are lower than expected. Check the following, then tap and try again

Ellipse

Make sure the PV circuit is switched ON and has been ON for at least 5 minutes

Ellipse

Make sure wire running through production CT included all the PV generation circuits

Ellipse

Make sure none of the branch circuits are going through the CT in reverse

Ellipse

Make sure there are storage or load circuits going through the production CT

Request Timed Out. Please try again.

Enlighten is compatible with the following browsers: Chrome 44 or higher, Firefox 41 or higher, Internet Explorer 11, Microsoft Edge for Windows, Safari 8 or higher. Cookies must be enabled.